进口化工混流泵(欧美进口十大品牌)

英国GRIMM格林进口化工混流泵 UK GRIMM Chemical mixed flow pump imported

英国GRIMM格林进口化工混流泵概述： 

         进口化工混流泵系单级、离心式混流泵，适合输送大流量，低扬程，清洁的或污染性的介质。

 

英国GRIMM格林进口化工混流泵结构特点：       

         进口化工混流泵是一种“拉出”式结构泵，在检查和拆卸叶轮和轴封时，毋须将与泵体相连接的管路拆开。装有经过精密加工的泵轴，装有稀有润滑的轴承，在填料涵盖中装有防护轴套。轴承箱的油位，可由油杯来控制。

        泵体的支脚，可承受来自管路的任何载荷，并直接传递给基础。这样，转子不会因泵受载荷而产生弯曲，从而保证轴承的zui佳的使用寿命。规格35-40的泵，其进出口法兰的尺寸，符合NEN5802和DIN2532标准，压力等级为1.0MPa；更大规格的泵压力等级为0.6MPa。由于较大的过流面积，从而减少阻塞。
        泵的旋转方向：从驱动端看泵，为顺时针方向。
        动力驱动可采用电动机或内燃机。
        泵装置上可以配备完整的放气装置，有利于吸入管路的排气。
        轴封：填料密封或双端面机械密封。

英国GRIMM格林进口化工混流泵技术参数： 

 

 

流       量：200-7000m3/h
扬       程：3-30m
口       径：100-800mm
转       速：400-1450r/min
功       率：5.5-250kw
电       压：380V
工作压力：可达1.0MPa
温度范围：-50℃～+180℃

英国GRIMM格林进口化工混流泵适用范围： 

◆化工流程中强制循环
◆海水养殖
◆城市煤气工程
◆水处理系统

英国GRIMM格林进口化工混流泵用途： 

            用于输送清洁和污染的介质，化学中性或腐蚀性的介质。

UK GRIMM Chemical mixed flow pump imported summary:

           Imported chemical mixed flow pumps are single stage and centrifugal mixed flow pumps. They are suitable for conveying large flow, low lift, clean or polluting media.

UK GRIMM Chemical mixed flow pump imported structure characteristics:

 

 

           The imported chemical mixed flow pump is a "pull out" structure pump. When the impeller and shaft seal are checked and disassembled, the pipe connected with the pump body is not to be taken apart. Equipped with a precision machined pump shaft, a rare lubricated bearing is provided with a protective sleeve in the packing cover. Oil bearing box, can be controlled by the oil cup.

        The support pin of the pump body can bear any load from the pipeline and pass it directly to the foundation. In this way, the rotor will not bend because of the pump load, thus ensuring the best service life of the bearing. Size 35-40 of the pump, its import and export flange size, in line with NEN5802 and DIN2532 standards, pressure rating of 1.0MPa; larger specifications of the pump pressure rating of 0.6MPa. As a result of the larger flow area, thereby reducing congestion.

        The direction of rotation of the pump: from the drive end, the pump is clockwise.

Power driven can use motor or internal combustion engine.

        The pump unit can be equipped with a complete deflation device, which is beneficial to the exhaust of the suction line.

        Shaft seal: packing seal or double end mechanical seal.

UK GRIMM Chemical mixed flow pump imported technical parameter:

 

 

 

 

 

 

Flow rate: 200-7000m3/h

Lift: 3-30m

Caliber: 100-800mm

Speed: 400-1450r/min

Power: 5.5-250kw

Voltage: 380V

Working pressure: up to 1.0MPa

Range of temperature: -50 DEG C to +180 DEG C

 

UK GRIMM Chemical mixed flow pump imported scope of application:

 

 

 

The chemical process of forced circulation

The marine aquaculture

The city gas engineering

The water treatment system

UK GRIMM Chemical mixed flow pump imported purpose:

         A medium used to transport clean and polluting chemicals, neutral, or corrosive.