进口滑片泵(欧美进口十大品牌)

英国GRIMM格林进口滑片泵 UK GRIMM Imported sliding vane pump

英国GRIMM格林进口滑片泵概述：

          进口滑片泵是一种容积式泵，分为立式和卧式。适用于输送介质温度在-40℃～80℃的汽油、煤油、柴油等轻质油品及不含润滑性的甲醇、苯、烷、氨水等其他溶剂类介质。产品自吸能力强，干吸极限真空可达0.075Mpa，极限真空度可达0.095Mpa，根据特殊工况也可改为磁力驱动型100%无泄漏。在输油系统中可用作传输、倒罐泵、自吸泵、扫仓泵。在一切工作领域中均可作为防爆泵使用。

(1)、进口滑片泵是一种容积式泵。
(2)、进口滑片泵主要用于输送介质粘度10～200mm2s的润滑油，也适用于输送各种性质类似的化工产品，输送介质温度为0℃-120℃，该系列泵具备自吸能力。
(3)、用于输送介质粘度10～20000mm2s的润滑油，原油，化工、食品浆状液，也适用于输送各种性质类似介质。输送介质温度为0℃～200℃，该系列泵具备自吸能力。

 

英国GRIMM格林进口滑片泵工作原理： 
         进口滑片泵，其工作原理是滑片装在开槽的转子中，转子偏心的装在泵体内，转子转动时，滑片自转子内滑出，紧贴泵体表面滑动，转子、滑片、泵体所形成的腔体随转子的转动，其空间大小呈周期性的变化，腔体增大时，吸入介质，腔体变小时，排出介质，周而复始，完成介质的输送过程。

英国GRIMM格林进口滑片泵性能特点：

1、较强的自吸能力：用于抽吸地下罐时，提升高度可达7.5m。
2、高效率：泵内滑片受离心力、机械推力、液压力的联合作用，紧贴定子内曲线运动，从而使泵具有独特的高效率。
3、保持性能不变的自调滑片：滑片从转子槽中滑出，不断补充磨损，而不降低泵的性能。这与齿轮泵有本质的区别。
4、输送剪力敏感性液体的能力：液力滑片高效能的设计使泵在驱动时减少了滑片对流体的剪力及搅动，避免了因此而产生的流体性质的改变。
5、维修简单、方便打开泵盖，提出旧滑片，插入新滑片。只需几分钟，您的泵就可以重新投入工作。日常检查同样容易。

英国GRIMM格林进口滑片泵优点： 
         进口滑片泵采用带叶片的转子驱动液体。材质上采用球墨铸铁配合自润滑的叶片。因为其优良的性能，可以传输粘性的和挥发性的液体，相比同等的泵功率更低。在低转速大流量的传输中更具优势。快速、低噪音的长期使用；叶片式结构使其性能稳定、无故障使用。
         自吸能力强，寿命长，体积小，效率高。在输送汽油、柴油或者类似介质的情况下，滑片泵具有非常大的优势，是自吸式离心油泵和铜轮齿轮泵的替代品。

英国GRIMM格林进口滑片泵技术参数：
流                 量：10-200m3/h
工    作   压   差：0.2-1MPa
zui高工 作 压 力：2.5MPa
吸入极限真空度：0.06-0.09MPa
自    吸   性   能：＜60s/5m
效                 率：70-85%
转                 速：300-970r/min
功                 率：2.2-75kw
输送介 质 温 度：-40～80℃
适用介质粘度值：1～1500cst

 

英国GRIMM格林进口滑片泵应用范围：
         进口滑片泵的应用范围相当广泛，不仅用于输送轻质油品汽油，煤油，柴油。还适用于输送润滑油，制冷剂，高粘性液体和芳香剂，氨水及溶剂类(如丙酮，醋酸甲酯，柠檬精，酒精等)介质。    
         进口滑片泵不仅可适用于固定设备中(如代替真空系统抽底油，扫仓，加油，油库中用于卸油等固定机组中)，还广泛用于机动加油车，油罐车，飞机加油车等。

英国GRIMM格林进口滑片泵安装使用：
         进口滑片泵广泛的用于流动或固定装置。在配合万联轴器或液压马达时，进口滑片泵可以安装在任何油罐车上，也可以与电机或柴油发动机连接，按照在金属地板上，用在任何大流量加油机或者流动加油设备上。是铜轮齿轮泵的替代品。

UK GRIMM Imported sliding vane pump summary:

        Imported sliding vane pump is a displacement pump, divided into vertical and horizontal. Applicable to the medium temperature of -40 ℃ to 80 ℃ gasoline, kerosene, diesel and other light oil products and non lubricating methanol, benzene, alkane, ammonia and other solvent media. The product has strong self suction capacity, the vacuum limit can reach 0.075Mpa, and the limit vacuum degree can reach 0.095Mpa. According to the special working conditions, it can be changed into magnetic drive type, and the 100% has no leakage. In the oil transportation system, it can be used as a transmission, an inverted tank pump, a self-priming pump and a scavenging pump. It can be used as an explosion-proof pump in all fields of work.

(1)Imported sliding vane pump is a displacement pump.

(2)Inlet vane pump is mainly used for conveying medium viscosity 10 ~ 200mm2s lubricating oil, is also suitable for conveying various properties of similar chemical products, medium temperature of 0 ℃ -120 ℃, the series pump with self absorption capacity.

(3)lubricating oil for conveying medium viscosity 10 ~ 20000mm2s, crude oil, chemical industry, food paste liquid, also suitable for conveying various properties similar media. The temperature of the conveying medium is between 0 and 200 ℃, and the series pumps have self-priming capacity.

UK GRIMM Imported sliding vane pump working principle:

          Inlet vane pump, the working principle of sliding piece in slotted rotor, the rotor is eccentrically arranged in the pump body, rotor, vane rotor from sliding out, close to the sliding surface, sliding vane pump, rotor cavity, the pump body is formed with the rotation of the rotor, the size of the space is changing periodically, inhalation of medium cavity increases, the cavity becomes small, discharge medium, and complete the transfer process of medium.

UK GRIMM Imported sliding vane pump product features:

 

1.Strong self suction capacity: for pumping underground tanks, lifting height of up to 7.5m.

2.High efficiency: the pump sliding vane by centrifugal force, mechanical thrust, hydraulic pressure of the joint action, close to the stator curve motion, so that the pump has a unique high efficiency.

3.To maintain the same performance of self regulating slides: slides slide out of the rotor groove, and continuously add wear and tear, without reducing the performance of the pump. This is essentially different from the gear pump.

4.The ability to transfer shear sensitive liquids: the design of hydraulic slide enables the pump to reduce the shear and agitation of the sliding fluid during driving, thus avoiding the change of the fluid properties resulting from it.

5.Maintenance simple, easy to open the pump cover, put forward the old slide, insert new slide. In only a few minutes, your pump can be put back to work. Routine checks are equally easy.

UK GRIMM Imported sliding vane pump advantage:

          Imported sliding vane pumps are driven by rotors with vanes. The material is made of ductile iron and self-lubricating blades. Because of its superior performance, viscous and volatile liquids can be transmitted, compared to the same pump power. It has more advantages in low speed and large flow transmission. Long term use of high speed and low noise; blade structure makes its performance stable and trouble free.

       The utility model has the advantages of strong self suction capability, long service life, small volume and high efficiency. In the case of the delivery of gasoline, diesel or similar media, the sliding vane pump has a very large advantage, is self suction centrifugal pump and copper gear pump alternative.

UK GRIMM Imported sliding vane pump technical parameter:

 

 

 

Flow rate: 10-200m3/h

Operating pressure: 0.2-1MPa

Maximum working pressure: 2.5MPa

Suction limit vacuum: 0.06-0.09MPa

Self absorption performance: < 60s/5m

Efficiency: 70-85%

Speed: 300-970r/min

Power: 2.2-75kw

Conveying medium temperature: -40 ~ 80 ℃

Applicable medium viscosity value: 1 ~ 1500cSt

UK GRIMM IImported sliding vane pump application range:

           Imported sliding vane pump has a wide range of applications, not only for light oil, gasoline, kerosene, diesel oil. It is also suitable for conveying lubricating oil, refrigerant, high viscous liquid and aromatic agent, ammonia water and solvent (such as acetone, methyl acetate, lemon essence, alcohol, etc.).

        Inlet vane pump can not only apply to fixed devices (such as vacuum pumping system instead of base oil, gas, oil and warehouse for unloading a fixed unit), is widely used in motor fuel trucks, tanker aircraft refueling vehicle, etc..

UK GRIMM Imported sliding vane pump installation and use of:

         Imported sliding vane pumps are widely used in flow or fixtures. In line with the million coupling or hydraulic motor, inlet vane pump can be installed in any tank car, can also be connected with the electric motor or diesel engine, in accordance with the metal floor, used in any large flow or flow refueling refueling equipment. It is a substitute for copper wheel gear pump.