进口粉体隔膜泵(欧美进口十大品牌)

英国GRIMM格林进口粉体隔膜泵 UK GRIMM Imported powder diaphragm pump

英国GRIMM格林进口粉体隔膜泵概述： 

          进口粉体隔膜泵亦称气动粉尘输送泵，是用来输送粉体的专用泵。只有在保持半流动状态下，粉体才不至于在泵腔体内被压成近似固体的块状导致输送失败和损坏泵。系统利用一组特殊的阀，在每个泵循环中，根据一定的时间顺序，将压缩空气(或其他的惰性气体)同步引入泵的液腔，使在粉体的泵送过程中保持流动状态。
          该产品采用了英国格林高性能气动双隔膜泵及高效、节能的气路诱导分配阀技术，实现了泵的马达供气与粉体流化气路的分离。可根据粉体的流动性差异来设置流化气的压力(2.5-6.9bar)。堆积密度小、易流动的粉体可设置较低的流化气压，可达到节约能耗的目的，同时也降低了空气释放组件的负荷。可根据输送量及输送高度来设置的气动马达供气压力为(2.0-3.8bar)。
   配套粉体拆包投料站(下吸料方式)或吸料枪(上吸料方式)、专用空气释放组件等，可以实现系统的无尘化操作，24小时不间断运行。

 

 

英国GRIMM格林进口粉体隔膜泵工作原理：

          在泵的两个对称工作腔中，各装有弹性隔膜，连杆将两块隔膜结成一体，压缩空气从泵的进气接头进入中间体后，推动两个工作腔内的隔膜，驱动连杆联结的隔膜同步运动。与此同时，另一工作腔中的气体则从其隔膜的背面排出泵外。当活塞达到行程终点，配气阀则自动的将压缩空气引入另一工作腔，推动泵朝反向运动，这样就形成了两个隔膜的同步往复运动。每个工作腔中又设置两个单向球阀，隔膜的往复运动，造成工作腔内容积的改变，迫使两个单向球阀交替的开启和关闭，从而使粉体连续的吸入和借用两侧导管的气流平稳输出避免堵塞。

 

英国GRIMM格林进口粉体隔膜泵性能特点：
1、无死点运行，低气压工作。
2、配置高效换位阀，输送物料更稳定。
3、密封性好，泵体全程无泄漏。
4、设计有气流诱导系统，减少出现粉末填满泵腔的情况。
5、自带泵腔清洁系统，物料不堵塞、不残留。
6、流化气体和泵的马达驱动气体可以分离，避免物料和空气接触氧化、潮解；流化气体可单独作进一步净化干燥处理，也可以使用其它气体。
7、配备锥形进料桶，效率更高，且无残留。
8、配备推车，可以方便的随处移动使用。
9、推车、进料桶、进料管均使用不锈钢材质，卫生耐用。
10、经济实用，安装简单，不像昂贵的传统大型预安装粉末输送系统。
11、更微小的物料搅动，避免物料发热，运行过程中无电火花，无热量产生。
12、更温和的内部剪切力，zui大限度确保物料的完整特性不受影响。
13、材质多样，泵体材质有铸钢、铝合金、不锈钢和工程塑料等材料。
14、可输送堆积密度为80～800kg/m3的粉末状、轻质、干燥、易流动的粉体，用途广泛。

英国GRIMM格林进口粉体隔膜泵技术参数： 

耗  气  量：0.67～2.0m3/min
气源压力：2.0～7.0bar
输  送  量：0～6000kg/h
输送高度：0～30m
口       径：32-100mm

 

 

英国GRIMM格林进口粉体隔膜泵应用领域： 
精细化工：颜料、染料、涂料、炭黑、钛白粉、氧化铁、陶瓷粉、重钙、轻钙、膨润土、分子筛、高岭土、硅胶粉、活性炭、酸、碱、石灰等。
农药矿石：尿素、碳酸氢铵、苏打粉、固体农药、钨粉、农药助剂、铜精矿粉、煤粉、磷矿粉、氧化铝粉等。
建筑冶金：纤维粉末、水泥、陶土、黄沙、石英沙、粘土粉、硅石、石灰石粉、白云石粉、玻璃纤维、二氧化硅、滑石粉、金属粉、染料粉等。
食品日化：面粉、淀粉、谷物、奶粉、酵母、糖、味精、面粉、作物粉体、洗衣粉等。
其他产业：粉末涂料、粉末冶金零件、纸粉、药片粉末、原料初加工粉末、氢氧化钠、漂白粉、过氧化钠等。

UK GRIMM Imported powder diaphragm pump summary:

         Imported powder diaphragm pump, also called pneumatic dust pump, is a special pump for conveying powder. Only when the semi flow is maintained, the powder will not be pressed into approximately solid blocks in the pump chamber, resulting in failure to deliver and damage the pump. The system uses a set of special valves in each pump cycle, according to the time order, the compressed air (or other inert gas) into the liquid cavity synchronous pump, so as to maintain the flow state in the process of feeding powder pump.

        The product uses the British Green high performance pneumatic double diaphragm pump and efficient energy-saving gas path induced distribution valve technology, to achieve the pump motor gas and powder fluidization, gas separation. The pressure of fluidizing gas can be set according to the fluidity difference of powder (2.5-6.9bar). The powder with small density and easy flowing can set lower fluidization pressure, and can save energy consumption and reduce the load of air releasing component. The pneumatic motor can be set according to the conveying capacity and the conveying height. The air supply pressure is (2.0-3.8bar).

        Supporting powder unpacking, feeding station (lower suction way) or suction gun (upper suction way), special air release module, etc., can realize the dust-free operation of the system, uninterrupted operation for 24 hours.

 

UK GRIMM Imported powder diaphragm pump working principle:

 

           In two symmetrical pump working chamber, the elastic diaphragm, a connecting rod two is integrated into the diaphragm, the compressed air from the intake pump into the intermediate joints, the diaphragm two working chamber, the diaphragm synchronous movement of driving connecting rod connection. At the same time, the gas in the other chamber is expelled from the back of the diaphragm. When the piston reaches the end of the stroke, the valve automatically introduces the compressed air into the other chamber and pushes the pump toward the opposite direction, thus forming the synchronous reciprocating motion of the two diaphragms. The two one-way valve is provided for each working chamber, the reciprocating diaphragm, causing changes in the working chamber volume, forcing the two one-way valve alternately opened and closed, so that the powder flow steady output continuous suction and use both sides of the duct to avoid clogging.

 

UK GRIMM Imported powder diaphragm pump performance characteristics: 

1. No dead center operation, low pressure work.

2. Configure efficient transposition valve, conveying materials more stable.

3. Good sealing, no leakage throughout the pump body.

4. Design airflow induction system to reduce powder filling pump cavity.

5. With pump cavity cleaning system, the material is not blocked, no residue.

The motor 6, fluidizing gas and pump driven gas can be separated, avoid material and air contact oxidation and deliquescence; fluidizing gas can be further purified dry processing, can also use other gases.

7. Equipped with conical feeding barrel, higher efficiency, and no residue.

8. Equipped with carts, you can easily move anywhere.

9. The trolley, the feeding barrel and the feeding pipe are all made of stainless steel, and they are sanitary and durable.

10. Economical, practical and easy to install, unlike expensive conventional large pre installed powder delivery systems.

11. Smaller material agitation, avoid material heating, operation process without electric sparks, no heat generated.

12. A more moderate internal shear force, to maximize the integrity of the material to ensure that the characteristics are not affected.

13. Material variety, pump body material has cast steel, aluminum alloy, stainless steel and engineering plastics and other materials.

14. Can transport density of 80 ~ 800kg/m3 powder, light, dry and easy to flow powder, widely used.

UK GRIMM Imported powder diaphragm pump technical parameter:

 

 

 

 

Gas consumption: 0.67 ~ 2.0m3/min

Air pressure: 2 ~ 7.0BAR

Conveying capacity: 0 ~ 6000kg/h

Conveying height: 0 ~ 30m

Caliber: 32-100mm

UK GRIMM Imported powder diaphragm pump application area:

 

 

 

Fine chemicals: pigments, dyes, paints, carbon black, titanium dioxide, iron oxide, ceramic powder, calcium carbonate, calcium carbonate, bentonite, zeolite, kaolin, silicon powder, activated carbon, acid, alkali, such as lime.

Pesticides, minerals: urea, ammonium bicarbonate, soda ash, solid pesticide, tungsten powder, pesticide additives, copper concentrate powder, coal powder, phosphate rock, alumina powder, etc..

The construction of Metallurgy: fiber powder, cement, clay, sand, quartz sand, clay powder, silica, limestone powder, dolomite powder, glass fiber, silica, talcum powder, metal powder, dye powder etc..

Food, daily chemicals: flour, starch, grain, milk powder, yeast, sugar, monosodium glutamate, flour, crop powder, washing powder, etc..

Other industries: powder coating, powder metallurgy, paper powder, pill powder, the initial processing of raw materials powder, sodium hydroxide, sodium peroxide bleaching powder, etc..