当前位置:上海秉奇阀门有限公司销售部 > 产品中心 > 进口其它泵 >   进口液下渣浆泵(欧美进口十大品牌)

进口液下渣浆泵(欧美进口十大品牌)

进口液下渣浆泵(欧美进口十大品牌)
产品价格:请联系咨询
更新时间:2019-09-04
产品型号:GR
产品品牌:英国格林
产品分类:上海机械及工业制品 > 上海泵
发布企业:上海秉奇阀门有限公司销售部
发布 IP:101.229.*.*
郑重提示:联系之前请务必点此阅读防骗提示!

详细介绍

英国GRIMM格林进口液下渣浆泵 UK GRIMM Imported liquid slurry pump

进口液下渣浆泵.jpg

英国GRIMM格林进口液下渣浆泵概述:    

 

          进口液下渣浆泵,浸入液下,是英国格林开发研制的新一代高效耐磨节能型立式渣浆泵,该系列采用国际上先进的固液两相流理论,按zui小损失原则设计,其过流部件的几何形状符合介质的流动状态,减少了涡流和撞击待局部与沿程水力损失,从而减轻了过流部件的磨损,搞高了水力效率,降低了运行噪音和振动,该系列泵过流部件采用高硬质高铬合金材质,其材质具有高抗磨、抗腐蚀性、搞冲击性性能,从而使其寿命提高。

          进口液下渣浆泵是立式单级单吸悬臂式离心泵结构,叶轮为半开式叶轮,在叶轮吸入边延伸处设有搅拌叶片。
          该泵主要用于环保、市政工程、火力发电厂、加气混凝土、煤气焦化厂、炼油厂、炼钢厂、采矿、造纸业、水泥厂、食品厂、印染等行业抽吸浓液、稠油、油渣、污浊液、泥浆、灰浆、流砂及城市排污沟道的流动污泥,以及含有泥砂渣物流体和有腐蚀性液体。GRYW型还可抽吸各种人畜粪便污水和大中沼气池,沼气工程时出料使用。GRYZ(S)型还可输送高温(500℃)的煤油、原油、沥青、油渣等工况。

英国GRIMM格林进口液下渣浆泵结构说明:
         进口液下渣浆泵为单级,单吸悬臂式结构,用轴承座,支承座,联接管连接泵的水力部件,液体由出液管部件排出,泵的叶轮为半开式叶轮,在叶轮叶片进口延伸处设有搅拌叶片,该泵主要特点是在液下部件的泵轴,有足够的刚度,叶轮,泵壳之间不设轴承,不采用轴封,可以输送含有较大浓度固体颗粒的介质。泵插入液下的长度在800-2000之间,如果需要可以配带吸入管。轴封采用液下泵插入液体中运行,不设轴封,传动由立式电动机安装在电机支承座上,用联轴器与泵相连。

英国GRIMM格林进口液下渣浆泵技术参数 

 

流量:12-413m3/h
扬程:4-60m
口径:50-200mm
转速:730-1480r/min
功率:1.1-90kw
电压:380V

英国GRIMM格林进口液下渣浆泵适用范围: 
          该泵主要用于环保、市政工程、火力发电厂、加气混凝土、煤气焦化厂、炼油厂、炼钢厂、采矿、造纸业、水泥厂、食品厂、印染等行业抽吸浓液、稠油、油渣、污浊液、泥浆、灰浆、流砂及城市排污沟道的流动污泥,以及含有泥砂渣物流体和有腐蚀性液体。

UK GRIMM Imported liquid slurry pump summary:

           The import of slurry, liquid, is a new generation of high wear-resistant energy saving vertical slurry pump developed by the British Green, the series uses the international advanced solid-liquid two-phase flow theory, designed according to the principle of minimal loss, its flow components conform to the geometry of the flow medium, reduces the eddy current and the impact to the local along with the hydraulic loss, thereby reducing the abrasion of flow components, high hydraulic efficiency, reduce operation noise and vibration, the series of pump flow components of high rigid high chromium alloy material, the material has high abrasion resistance, corrosion resistance, impact performance, so as to improve its life.

        The inlet liquid slurry pump is a vertical single stage single suction cantilever centrifugal pump structure. The impeller is a semi open impeller, and a stirring blade is arranged at the extending direction of the suction side of the impeller.

        The pump is mainly used for environmental protection, municipal engineering, power plant, aerated concrete, gas coking plants, oil refineries, steel mills, mining, paper, cement factory, food factory, printing and dyeing industry, heavy oil, diesel oil, liquid suction dirty liquid, slurry, mortar, sewage flow channel sand and the flow of the city sludge and sand containing residue fluid and corrosive liquids. GRYW can also suck various kinds of human and livestock excrement, sewage and large and medium methane tank. GRYZ (S) type can also carry high temperature (500 DEG C) of kerosene, crude oil, asphalt, oil and other conditions.

 

UK GRIMM Imported liquid slurry pump structure description:

 

 

 

 

 

 

           The import of slurry for single-stage, single suction cantilever structure, bearing seat, bearing seat, the connecting pipe hydraulic components connected with the pump, the liquid from the liquid outlet pipe parts discharge pump impeller for semi open impeller with stirring blades in the impeller blade inlet extension, the pump is the main characteristics of pump shaft parts the liquid, with enough rigidity, impeller, pump shell bearing set between the seal, can be transported with high concentration of solid particles of the medium. The length of the pump is between 800-2000. If necessary, the suction pipe can be provided. The shaft seal adopts the liquid pump to insert into the liquid and runs without the shaft seal. The transmission is installed on the motor support seat by the vertical motor and connected with the pump by the coupling.

UK GRIMM Imported liquid slurry pump technical parameters:

 

 

 

 

 

 

 

 

 

 

 

Flow rate: 12-413m3/h

Lift: 4-60m

Caliber: 50-200mm

Speed: 730-1480r/min

Power: 1.1-90kw

Voltage: 380V

UK GRIMM Imported liquid slurry pump scope of application:

 

           The pump is mainly used for environmental protection, municipal engineering, power plant, aerated concrete, gas coking plants, oil refineries, steel mills, mining, paper, cement factory, food factory, printing and dyeing industry, heavy oil, diesel oil, liquid suction dirty liquid, slurry, mortar, sewage flow channel sand and the flow of the city sludge and sand containing residue fluid and corrosive liquids.

询价留言(*为必填项)
上海秉奇阀门有限公司销售部
所在地区:
上海 上海 
联系地址:
上海市 
联 系 人:
黄天翔
联系电话:
13524269805 
传真:
 
联系手机:
13816537518 
联系我们时请一定说明是在贸商网上看到的此信息,谢谢!
本页网址:http://2971.mao35.com/product-show-3355.html
推荐关键词:进口液下渣浆泵
免责声明:该信息由相关发布企业发布,贸商网对此不对信息真伪提供担保。
风险防范建议:合作之前请先详细阅读本站防骗须知。贸商网保留删除上述展示信息的权利;我们欢迎您举报不实信息,共同建立诚信网上环境。

主营项目:进口球阀|进口角座阀|进口针型阀|进口疏水阀|进口电磁阀|进口过滤器|进口调节阀|进口拉断阀|进口阻尼器|进口离心泵|进口真空泵|进口隔膜泵|进口齿轮泵|进口排污泵|进口搅拌机|进口风机…
地址:上海市联系电话:13524269805  13816537518访问统计:41552
贸商网 设计制作,未经允许翻录必究。Copyright © 2014-2022 mao35.com, All rights reserved.    

以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,贸商网对此不承担任何保证责任。